NOC 73102 job description: drywall installer and finisher apprentice duties and responsibilities
- Clean and prepare surfaces
- Mix plaster ingredients in trough to desired consistency
- Apply, level and smooth coats of plaster using trowels, floats, brushes and spraying equipment
- Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
- Finish corners and angles and create decorative designs in finish coat, if required
- Cure freshly plastered surfaces
- Mould and install ornamental plaster panels, cornices and trim
- Spray acoustic materials or texture finish over walls and ceilings.
- Measure, cut and fit drywall sheets for installation on walls and ceilings
- Position and secure sheets to metal or wooden studs or joists
- Cut and install metal corner beads to protect exterior corners
- Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
- Tape over joints using taping machine and embed tape in compound
- Smooth out excess compound and allow coat to dry
- Apply successive coats of compound and sand seams and joints
- Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings.
- Prepare wall and ceiling layouts
- Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
- Attach metal or gypsum lath to studs or furring using nails, screws, clips or wire ties
- Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
- Install corner beads and wire mesh around beams to which plaster is to be applied
- May install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath.
Job titles under NOC 73102
See every job title and its code in the A–Z job title index, or all TEER 3 jobs.
Is NOC 73102 eligible for Express Entry?
By TEER, yes. TEER 3 is inside the TEER 0 to 3 range that the Federal Skilled Worker Program and Canadian Experience Class accept, and NOC 73102 is also on the Federal Skilled Trades list. You still need qualifying work experience, language test results and enough CRS points to get an invitation. Category-based draws and provincial nominee programs use their own occupation lists.
| Program | TEER check | Why |
|---|---|---|
| Federal Skilled Worker | TEER qualifies | TEER 3 is within TEER 0 to 3 |
| Canadian Experience Class | TEER qualifies | TEER 3 is within TEER 0 to 3 |
| Federal Skilled Trades | Listed trade | NOC 73102 is in a trade group IRCC accepts. Check IRCC |
| Spouse's open work permit | Qualifies | On IRCC's TEER 2–3 list. SOWP rules |
Category-based draws: NOC 73102 is not on any category-based selection list (checked 2026-10-16). Under NOC 2016, TEER 3 was skill level B ("NOC B").
Category-based Express Entry draws and provincial nominee programs use their own occupation lists. Check the current lists on IRCC's Express Entry page and provincial nominee page.
NOC 73102: common questions
What is NOC 73102?
NOC 73102 is the code for plasterers, drywall installers and finishers and lathers in Canada's National Occupational Classification (NOC 2021). Its first digit, 7, is the broad category and its second digit, 3, is the TEER level. Immigration forms, job offers and LMIA applications use this five-digit code.
What TEER is NOC 73102?
NOC 73102 is TEER 3. Occupations that usually need a college program or apprenticeship of less than two years, or more than six months of on-the-job training. Under the older NOC 2016 system, TEER 3 lines up with skill level B.
Is NOC 73102 eligible for Express Entry and PR?
By TEER, yes. TEER 3 is inside the TEER 0 to 3 range that the Federal Skilled Worker Program and Canadian Experience Class accept, and NOC 73102 is also on the Federal Skilled Trades list. You still need qualifying work experience, language test results and enough CRS points to get an invitation. Category-based draws and provincial nominee programs use their own occupation lists.
Is NOC 73102 in a category-based Express Entry draw?
No. As of IRCC's list dated 2026-10-16, NOC 73102 is not in any category-based selection list (healthcare, STEM, trades, education, transport and others). You can still be invited in general and program-specific draws.
Is NOC 73102 eligible for a spousal open work permit (SOWP)?
Yes. NOC 73102 is on IRCC's list of TEER 3 occupations that qualify, so a worker in this job can support a spouse's open work permit, as long as their own work permit has at least 16 months left when the spouse applies (IRCC page modified 2026-06-12).
What is the NOC code for a drywall installer and finisher apprentice?
Drywall installer and finisher apprentice is listed under NOC 73102, plasterers, drywall installers and finishers and lathers. The job title alone does not decide your code: your duties should match the main duties of NOC 73102.
How do I know if NOC 73102 is my NOC code?
Compare what you actually do with the main duties listed for NOC 73102, not just your job title. IRCC expects your duties to match the lead statement and most of the main duties of the code you choose. If they fit another code better, use that one. You can paste your duties into nocfinder to see how they line up, duty by duty.
Source: ESDC NOC 2021 · IRCC program pages. Not legal advice.